digiset timer

[Scott-Kaz]

if anyone is looking for a digiset tier try these guys out!its cheap but looks good and works finehttp://www.skycraftsurplus.com/index.asp?PageAction=VIEWPROD&ProdID=1980

[Blowby]

Thanks! I just ordered 2 with the connector.

[Blowby]

OK....so I ordered 3 and put together a timed 3 stage controller. It bolts into my ashtray compartment in the dash. Wiring harness is finished and a WOT switch activates the timers.

[hammered54]

thats pretty slick...

[Robert56]

Wow that is bad azz for sure. Man what a great engineers mind. Do you have any real world pictures yet? seems you could sell a truck load of them?

The original link is a no workie?
Robert

[Blowby]

I'll take some pictures today since all the electrical connections and fuse box should be finished. Just need some nitrous lines measured and bungs welded to the intake spider.

[Blowby]

It was getting late in the afternoon and the lighting was poor so I turned on the night option on the camera so the color is washed out. The parts are an ivory colored ABS plastic.

[Blowby]

Took it out for a spin tonight. I used jets in the order of stages, .034, .040, .046 just to test if the Digiset 3 stage system worked (smallest jets I had). I brought the bottle up to about 900 and put it in 4 wheel drive and at 50mph hit it. I had the timers set at .3, 1.6 and 2.2 and was it smooth and the pull was much more than I thought I would get from these small jets. So far so good

[Blowby]

Wiring and lines are finished! Can't wait to test these Digiset timers out. Pictures of the engine compartment.

"To-do" List is getting shorter. Track date: March 6th 2010 at Speedworld Dragstrip in Phoenix Arizona.